www.vishay.com for technical questions, contact: ww2aresistors@vishay.com document number: 30212 54 revision: 10-may-11 this document is subject to change without notice. the products described herein and this document ar e subject to specific disclaimers, set forth at www.vishay.com/doc?91000 CPL vishay dale wirewound resistors, commercial power, axial lead, low value features ? high power to size ratio ? low inductance, less than 5 nh ? ceramic cases are available with circuit board stand-offs (designated with a -3 model ending) ? superior surge capability ? extremely low resistance values ? complete welded construction ? special inorganic potting compound and ceramic case provide hi gh thermal conductivity in a fireproof package ? compliant to rohs directive 2002/95/ec note (1) resistance is measured 3/8" [9.52 mm] from resistor body. standard electrical specifications global model historical model power rating p 40 c w resistance range ??? ? tolerance % weight (typical) g CPL03 CPL-3 3 0.01 to 0.10 1, 3, 5, 10 3.4 CPL03...3 CPL-3-3 3 0.01 to 0.10 1, 3, 5, 10 3.6 CPL05 CPL-5 5 0.01 to 0.10 1, 3, 5, 10 4.8 CPL05...3 CPL-5-3 5 0.01 to 0.10 1, 3, 5, 10 5.0 CPL07 CPL-7 7 0.01 to 0.10 1, 3, 5, 10 6.8 CPL07...3 CPL-7-3 7 0.01 to 0.10 1, 3, 5, 10 7.0 CPL10 CPL-10 10 0.01 to 0.10 1, 3, 5, 10 9.5 CPL10...3 CPL-10-3 10 0.01 to 0.10 1, 3, 5, 10 9.9 CPL15 CPL-15 15 0.01 to 0.10 1, 3, 5, 10 16.8 CPL15...3 CPL-15-3 15 0.01 to 0.10 1, 3, 5, 10 17.4 technical specifications parameter unit CPL resi stor characteristics temperature coefficient ppm/c 300 short time overload - 5 x rated power for 5 s maximum working voltage v ( p x r ) 1/2 operating temperature range c - 65 to + 275 terminal strength lb 10 minimum dielectric withstanding voltage v ac 1000 global part number information global part numbering example: CPL05r0500jb143 global model value tolerance packaging special CPL03 CPL05 CPL07 CPL10 CPL15 r = decimal r1000 = 0.10 ? f = 1.0 % g = 2.0 % h = 3.0 % j = 5.0 % k = 10.0 % e14 = lead (pb)-free bulk e31 = lead (pb)-fre e four layer bulk e01 = lead (pb)-free skin pack (dash number) (up to 3 digits) from 1 to 999 as applicable b14 = tin/lead bulk b31 = tin/lead four layer bulk j01 = tin/lead skin pack historical part numberin g example: CPL-5-3 0.05 ? 5 % b14 CPL-5-3 0.05 ? 5 % b14 historical model resistance value tolerance code packaging * pb containing terminations are not rohs compliant, exemptions may apply ** please see document vishay material category policy: www.vishay. com/doc?99902 b14 3 pl05r050 0j c
document number: 30212 for tec hnical questions, contact: ww2aresistors@vishay.com www.vishay.com revision: 10-may-11 55 this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 CPL wirewound resistors, commercial power, axial lead, low value vishay dale dimensions in inches [millimeters] note (1) potting compound may e xtend outside of ceramic case up to 0.060 [1.52] maximum per side. material specifications element: self-supporting copper-nickel alloy or nickel- chrome alloy, dependin g on resistance range body: steatite ceramic case with inorganic potting compound terminals: tinned copper part marking: dale, model, wattage, value, tolerance, date code derating global model dimensions in inches [millimeters] a (1) 0.031 [0.794] b 0.031 [0.794] c 0.031 [0.794] d 0.031 [0.794] e 0.001 [0.025] CPL03 0.875 [22.22] 0.313 [7.94] 0.313 [7.94] - 0.036 [0.914] CPL03...3 0.875 [22.22] 0.313 [7.94] 0.313 [7.94] 0.375 [9.52] 0.036 [0.914] CPL05 0.875 [22.22] 0.375 [9.52] 0.344 [8.73] - 0.036 [0.914] CPL05...3 0.875 [22.22] 0.375 [9.52] 0.344 [8.73] 0.406 [10.32] 0.036 [0.914] CPL07 1.391 [35.32] 0.375 [9.52] 0.344 [8.73] - 0.036 [0.914] CPL07...3 1.391 [35.32] 0.375 [9.52] 0.344 [8.73] 0.469 [11.91] 0.036 [0.914] CPL10 1.875 [47.62] 0.375 [9.52] 0.344 [8.73] - 0.036 [0.914] CPL10...3 1.875 [47.62] 0.375 [9.52] 0.344 [8.73] 0.469 [11.91] 0.036 [0.914] CPL15 1.875 [47.62] 0.500 [12.70] 0.500 [12.70] - 0.036 [0.914] CPL15...3 1.875 [47.62] 0.500 [12.70] 0.500 [12.70] 0.625 [15.87] 0.036 [0.914] a b c CPLxx e 1.0 [25.4] minimum 0.125 [3.18] typical 1.0 [25.4] minimum d b CPLxx...3 e c a - 65 - 25 25 75 125 175 225 275 ambient temperature in c % n i r e w o p d e t a r 40 0 20 40 60 80 100 120 performance test conditions of test te st limits (eia rs-344) thermal shock - 55 c to + 275 c, 5 cycles, 30 min dwell time (5.0 % + 0.05 ? ) ? r short time overload 5 x rated power for 5 s (4.0 % + 0.05 ? ) ? r dielectric withstanding voltage 1000 v rms for 1 min (2.0 % + 0.05 ? ) ? r low temperature operation - 65 c, full rated working voltage for 45 min (3.0 % + 0.05 ? ) ? r bias humidity 75 c, 90 % to 100 % rh, 240 h (5.0 % + 0.05 ? ) ? r load life 1000 h at rated power, + 40 c, 1.5 h on, 0.5 h off (5.0 % + 0.05 ? ) ? r terminal strength 5 s to 10 s 10 pound pull test, tors ion test - 3 alternating directions, 360 each (1.0 % + 0.05 ? ) ? r resistance to solder heat terminal immersed 3.5 s in molten solder at 1/8" to 3/16" from body (1.0 % + 0.05 ? ) ? r
legal disclaimer notice www.vishay.com vishay revision: 02-oct-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk. pleas e contact authorized vishay personnel to ob tain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. vishay intertechnology, inc. hereby certifi es that all its products that are identified as ha logen-free follow halogen-free requirements as per jedec js709a stan dards. please note that some vishay documentation may still make reference to the iec 61249-2-21 definition. we co nfirm that all the products identified as being compliant to iec 61249-2-21 conform to jedec js709a standards.
|
